Description
Key Features and Benefits of EXTREME BOND?
Adhesion to a wide range of substrates.
Fast cure at room temperature.
Can be used with or without nozzle.
High shear and peel strength.
Good impact strength.
Good chemical resistance.
Directions for use
1) Surfaces must be clean, dry and grease-free. If using a cleaning solvent, allow 3-4 minutes to fully evaporate before applying adhesive.
2) Apply a thin bead of adhesive pre-mixed through a static mixer nozzle. If no mixing nozzle is being used, make sure one component is extruded on top of
the other (not side by side).
3)Alternatively apply a thin layer of resin on one component and hardener on the other.
4) Assemble components and clamp.
5) Maintain pressure until handling strength is achieved. The time required will vary according to the joint design and surfaces being bonded.
6) Allow 24 hours for adhesive to fully cure. Accelerated cure times may be achieved by heating.
Extreme Bond MSDS Part A
Extreme Bond MSDS Part B
![](mailto:?Subject=Extreme Bond&Body=Use Extreme Bond for the bonding of wood, glass, metal, plastic and composites.
EXTREME BOND is a 2nd generation acrylic adhesive. This has been designed to combine high-shear strength & excellent temperature resistance with additional qualities of a rubber toughened adhesive.
<a href="https://www.imgdistributors.com/wp-content/uploads/2017/01/extreme-bond-acrylic-adhesive-img-distributors.pdf" target="_blank" rel="noopener"><img class="alignnone wp-image-4432 size-full" src="https://www.imgdistributors.com/wp-content/uploads/2018/08/tech_sheet_btn.jpg" alt="" width="335" height="86" /></a>
<strong>Please see below for MSDS Sheets: Extreme Bond Part A & Extreme Bond Part B</strong>){kind=link}
Reviews
There are no reviews yet.